Scanivalve MPS4232, Руководство по аппаратному и программному обеспечению

Страница: 52 / 96

46
MPS4232
Section 5: Software
IP Variables
The IP settings control the IP address and associated network identification settings of the MPS4200. The IP configuration is
accessed by the command LIST IP. These settings can only be saved using the SAVE IP command.
List IP Settings (LIST IP)
TYPE Get
DESCRIPTION Returns all of the IP settings.
SYNTAX LIST IP
RETURNS All of the IP setting followed by the prompt.
EXAMPLE LIST IP
SET IPADD 10.0.1.222
SET SUBNET 255.255.0.0
SET MAC 0.96.93.90.0.100
SET GW 0.0.0.0
>
Set IP Address of the MPS (IPADD)
COMMAND IPADD
TYPE Set/Get
DESCRIPTION Sets or retrieves the IP address of the MPS.
SYNTAX IPADD <ipadd>
Where <ipadd> is any valid IP address in the form nnn.nnn.nnn.nnn
RETURNS Prompt when ready to accept a new command
EXAMPLE SET IPADD 10.0.1.222
>
DEFAULT 191.30.95.100
RANGE Any valid IP address
Set Subnet of the MPS (SUBNET)
COMMAND SUBNET
TYPE Set/Get
DESCRIPTION Sets the subnet mask.
SYNTAX SET SUBNET <mask>
Where <mask> is in the form nnn.nnn.nnn.nnn
RETURNS Prompt when ready to accept a new command
EXAMPLE SET SUBNET 255.255.0.0
>
DEFAULT 255.255.255.0
RANGE Any valid subnet mask
Set Physical Ethernet Address (MAC)
COMMAND MAC
TYPE Set/Get
DESCRIPTION Sets the hardware’s MAC address.