Scaime IPB 50, Инструкция по эксплуатации

Страница: 6 / 28

IPB50
5
FRONT PANEL KEYS AND INDICATORS – IPB50
The front panel of the IPB50 is designed for quick but simple weighing applications. It consists of an LED
display with 6 easy to read digits, 13 mm in height, 6 LED indicators, and below a 4 key, polycarbonate, water-
resistant membrane .
1
If turned on, indicates that the weight shown is the net weight.
2
If turned off, indicates that the weight is stable and can be obtained.
3
If turned on, indicates that the weight detected by the weighing system is close zero, within ±¼ of the division.
4
If turned on, indicates the unit of measure in use (kg).
5
If turned on, indicates the unit of measure in use (lb) or setpoint 1 is on.
6
If turned on, indicates the functional status of the instrument: peak, hold and piece counting operations or setpoint
2 is on.
Performs an automatic ZERO when the signalled weight is within (+/- 2%) of the total capacity. LED
à
0
ß
is on
Cancels a negative tare value resulting from a previous tare with the load now removed.
The displayed value of the weight present on the scale is stored as TARE and the display shows zero. NET LED turns on
Enables the operating Fn that was selected previously in the USER SET-UP function. By pressing it for several seconds, it is
possible to immediately select a different operating Fn.
↵
Confirms each choice made in set-up menus. The ~ LED should be off
PRINT: Commands the data transmission of the serial port if a printer is connected