Savin IS330DC, Руководство по установке

Страница: 89 / 238

3
2. ScanRouter V2 Lite Setup
Before installing ScanRouter V2 Lite, you need to set up a computer as delivery
server. Before setup, configure the TCP/IP settings. For information about the
TCP/IP settings, ask the network administrator.
Account Settings-Windows NT/2000 Only
To install and launch ScanRouter V2
Lite, use the same account which was
created in Windows and gave the Ad-
ministrator permission. How to cre-
ate the account is explained below.
The procedure for creating an ac-
count and setting the permissions is
different depending on whether the
router is a member of a domain.
Note
❒
Use the same account when Scan-
Router V2 Lite is installed.
❒
The existing account with equal
authority can also be used.
When a Member of a Domain
Preparation
If you want to create a new ac-
count, ask the network administra-
tor to register an account to be
used only for ScanRouter V2 Lite
in the domain server.
For Windows NT
A
Log on as a member of the Ad-
ministrators group.
B
Select [ Start ] , point to [ Programs ] ,
point to the [ Administration Utility ]
folder, and select [ User Manager ] or
[ User Manager for Domains ] .
C
Select
[ Administrators ]
from the
group list and select [ Properties ]
from the [ User ] menu.
The local group properties are dis-
played.
D
Select [ Add ] .
A list of users and groups which
belong to the domain is displayed
on the "Add Users and Groups" di-
alog box.
E
With the [ Name ] box, select a
launch account, and then select
[ Add ]
.
If the account is not displayed,
check if the correct domain server
is selected from
[ Domain or Comput-
er ] drop-down menu.
F
Since the launch name is added to
the
[ Add Names ] box, select [ OK ] .
G
Make sure that the launch ac-
count has been added to the
[ Mem-
bers ] box, and select [ OK ] .
H
Exit User Manager.
For Windows 2000
A
Log on as a member of the Ad-
ministrators group.
B
Right-click [ My Computer ] , then se-
lect [ Manage ] .