Savin IS330DC, Руководство по установке

Страница: 232 / 238

Installing DeskTopBinder V2 Lite
4
2
G
Confirm the entered information, and then click [ Yes ] .
If the client computer is installed with DeskTopBinder , the Choose Setup
Type dialog box will appear.
H
Select the installation method, and then click [ Next ] .
I
Select the installation location, and then click [ Next ] .
Note
❒
When a ScanRouter V2 product is already installed, the installation loca-
tion cannot be changed. DeskTopBinder V2 Lite is installed as a common
folder with the ScanRouter V2 .
J
Specify the locations of the documents that DeskTopBinder V2 Lite will
manage, and then click
[ Next ] .
You can change the location of documents managed by DeskTopBinder V2
Lite , but generally leave them as they are and use the RDCab folder, the
stored location folder.
In the RDCab folder, the PL folder is created. The RDCab folder must be cre-
ated in the built-in hard drive of client computers where
DeskTopBinder V2
Lite
is installed.
K
Confirm the setup details of the installation location, and then click [ Next ] .
L
Click [ Finish ] .
The installation of
Job Binding
and
ScanRouter V2 Link
follows. After that,
follow the directions that appear on the screen.
Functions of Job Binding
Job Binding is installed at the same time DeskTopBinder V2 Lite is installed.
Job Binding stores DeskTopBinder V2 Lite documents and files created by var-
ious applications as print data. Job Binding can be instructed to print just one
document, staple the saved print data onto another, print in duplex, change the
print order and so forth.
From the
DeskTopBinder V2 Lite Install dialog box, installing only Job Binding
is possible.
Note
❒
Job Binding is enabled only when the RPCS printer driver is installed on the
printer.