Savin IS330DC, Руководство по установке

Страница: 137 / 238

27
4. Appendix
Troubleshooting
Problem Possible Causes and Solutions
When launching the ScanRouter V2
Administration Utility from the de-
livery server, the following message
appears: " Delivery server authoriza-
tion settings may be incorrect. The
[Authorization for Server Access] di-
alog box will be displayed. Set autho-
rization properly. " The ScanRouter V2 Lite starting account password may
have been changed. Take the following steps, and then
restart the delivery server.
Click [ OK ] in the dialog box.
When the [ Authorization for Server Access ] dialog box ap-
pears, enter the new password, and click
[ OK ]
. Restart
the delivery server.
When launching the ScanRouter V2
Administration Utility from a client
computer, the following message ap-
pears: " Delivery server authoriza-
tion settings may be incorrect.
Restart management tools on the de-
livery server and set authorization
properly. " The ScanRouter V2 Lite starting account password may
have been changed. Take the following steps, and then
restart the server.
From the
[ Start ] menu on the server, point to [ ScanRouter
V2 ] , and then select [ ScanRouter V2 Administration Utility ] .
The following message will appear: " Delivery server
authorization settings may be incorrect. The [Authori-
zation for Server Access] dialog box will be displayed.
Set authorization properly. " Click
[ OK ] in the message
box.
When the [ Authorization for Server Access ] dialog box ap-
pears, enter the new password, and click
[ OK ]
.
Restart the server.
Note
❒
If the starting mode for the delivery server is set to
[ Run in service mode ] , you must log into Windows.
The operation panel of a network de-
vice displays " Cannot communicate
with server. " • Make sure that the server is operating properly.
• Make sure that the network device has the correct IP
addresses for itself and for the server or other net-
work settings.
The operation panel of a network de-
vice displays "Address update failed.
Try again?" Delivery service may not have started. Restart delivery
service from the
[ Server ]
menu of the ScanRouter V2 Ad-
ministration Utility.
The operation panel of a network de-
vice displays " Destination and send-
er list update has been failed. Try
again? " • Make sure that the server is operating properly.
• Make sure that the network device has the correct IP
addresses for itself and for the server or other net-
work settings.
• Make sure that the network device settings are cor-
rect in [ Set I/O Device ] menu on the ScanRouter V2
Administration Utility.