Savin IS330DC, Руководство по установке

Страница: 119 / 238

Network Administrator Duties
9
2
❖ ❖ ❖ ❖
Error Message
A message will appear anytime
there is an error. See "Troubleshoot-
ing" for handling a specific error.
❖ ❖ ❖ ❖
Disk Space Low Warning
If free disk space falls below the val-
ue set in
[ Issue alert at: ]
, you will re-
ceive a low disk space message.
Upon receiving this message, you
should delete any unnecessary data
to maintain enough disk space.
Reference
⇒
P.16 “Undelivered Data”
⇒
P.27 “Troubleshooting”
⇒
P.15 “Error/Disk Space”
Change in user settings
When there are changes in the lay-
out/configuration of the network,
take the following actions.
❖ ❖ ❖ ❖
Adding a User
To add a user to the system, follow
the steps below.
• Install and configure DeskTop-
Binder V2 or ScanRouter V2
Link on the user's computer.
• Set the destination on the serv-
er. Assign the new user to a
group if necessary.
⇒
P.17 “Des-
tinations”
❖
❖ ❖
❖
Removing a User
To remove user from the system,
take the following actions.
• Delete the user's destination in-
formation from the server. If the
user was a member of a group,
the user will be automatically
deleted from the group.
⇒
P.17
“Destinations”
• Delete the user from the sender
list.
⇒
P.19 “Senders”
❖ ❖ ❖ ❖
Changing User's Information
If a user's information changes,
take the following steps.
• Edit the user's information as
appropriate.
• If the user's group association
has changed, change the group
information. If necessary, up-
date the destination informa-
tion.
⇒
P.17 “Destinations”
❖
❖ ❖
❖
Changing the Group Address
If the user's group association has
changed, follow the procedures
given below.
• If the users group name has
changed, change the group des-
tination information.
⇒
P.17
“Destinations”
Changes in the environment
If network devices or the system lay-
out is changed, take the following ac-
tions. Not all network devices require
configuration in
[ Set I/O Device ]
.
❖ ❖ ❖ ❖
Adding a Network Device
When adding a network device,
take the following steps.
• Register the network device.
⇒
P.16 “Set I/O Device”
• Make the delivery settings on
the network device. For detail
settings, see the operating in-
structions that come with the
device.
❖
❖ ❖
❖
Changing Network Device Settings
When changing network device
settings or exchanging in new net-
work devices, perform the follow-
ing:
• Change the settings for the net-
work device.
⇒
P.16 “Set I/O
Device”