Savin IS200e, Руководство по эксплуатации

Страница: 94 / 240

Configuring the Scanner Settings
84
3
PPPP
Press [ OK ] .
This saves the setting you have se-
lected, and returns to the Default
Scan Settings menu.
Note
❒
Pressing
[ Cancel ]
discards the
selected setting, and returns to
the Default Scan Settings menu.
QQQQ
By pressing [
↓↓↓↓
Next ] to display “5.
Erase Colour” through “11. Origi-
nal Settings” as the setup item, se-
lect options for each of them in
the same way that you have done
in steps
DDDD
through
GGGG
.
RRRR
After all the settings are the way
you want, press
[ Exit ] .
This registers the Scan Settings you
have configured to the “Default”
memory area, and returns to the
Scan Settings menu.
SSSS
While the Scan Settings menu is
displayed, press the
{{{{
2
}}}}
,
{{{{
3
}}}}
or
{{{{
4
}}}}
key to display a correspond-
ing User Scan Settings menu.
For example, press the
{{{{
2
}}}}
key to
display the User 1 Scan Settings
menu.
TTTT
Repeat steps
DDDD
through
RRRR
for each
of “User 1”, “User 2”, and “User
3” memory areas.
UUUU
When you are finished, press [ Ex-
it ] .
This returns to the Scanner Fea-
tures menu.
VVVV
Press [ Exit ] .
This exits the Scanner Features
menu, and returns to the standby
screen that is displayed when you
turn the power on.
Important
❒
Never turn off the power of this
machine before the standby
screen is displayed. Doing so
can discard all the settings you
have configured, and return this
machine to its factory default
status.
Note
❒
Instead of pressing
[ Exit ]
, you
can press a number key to enter
another setting menu.