Savin IS200e, Руководство по эксплуатации

Страница: 87 / 240

Scan Settings
77
3
❖ ❖ ❖ ❖
Resolution
This item lets you select the scan resolution. You can select from 100dpi,
200dpi, 300dpi, 400dpi, 600dpi and Custom Resolution.
Note
❒
The higher the resolution, the smaller the number of original pages that
can be scanned at a time.
❒
When you select Custom Resolution, you can specify the resolution within
the range of 100dpi through 1200dpi in 1dpi increments.
❖ ❖ ❖ ❖
Scan Size
This item lets you select the size of the area to be scanned. You can select from
the following options.
A4
S
, A5
R
, A5
S
, B5JIS (Japanese Industrial Standard)
S
, 8
1
/
2
x14
S
,
8
1
/
2
x13
S
, 8
1
/
2
x11
S
, 5
1
/
2
x8
1
/
2
R
, 5
1
/
2
x8
1
/
2
S
, Custom Area Setting
Note
❒
When
[ Custom Area Setting ]
is selected, specify the scanning area for
[ Start
Positn. ] and [ Scanning Area ] .
❖ ❖ ❖ ❖
Start Positn.
Specify the position where scanning starts when [ Custom Area Setting ] is select-
ed in the
[ Scan Size ]
list.
Enter the offset from the reference (start) point in millimeters or inches.
Note
❒
This setting is enabled only when [ Custom Area Setting ] is selected in the
[ Scan Size ] list.
❒
You can select millimeters or inches to specify the position using [ Unit of
Measure ]
in
[ 2.SendScan Settings ]
under the Scanner Features menu. See
⇒
p.67 “Unit of Measure” for details.
❖
❖ ❖
❖
Scanning Area
Specify the position where scanning ends when [ Custom Area Setting ] is select-
ed in the
[ Scan Size ]
list.
Enter the offset from the position specified for
[ Start Positn. ]
, in millimeters or
inches.
Note
❒
This setting is enabled only when [ Custom Area Setting ] is selected in the
[ Scan Size ]
list.
❒
You can select millimeters or inches to specify the position using [ Unit of
Measure ]
in
[ 2.SendScan Settings ]
under the Scanner Features menu. See p.67
“Unit of Measure” for details.
❒
Make sure that you specify vertical/horizontal positions and scanning areas
to be within the available scan area. The available scan area varies depend-
ing on where you place the originals (on the exposure glass or on the ADF).
The following illustrates the reference point and actual scanning area in ac-
cordance with the place where you set the originals.