Savin IS200e, Руководство по эксплуатации

Страница: 103 / 240

Configuring Settings Using a Web Browser
93
3
Important
❒
It may not be possible to return to the previous page using the browser’s
[ Back ] button. In such a case, click the [ Update ] button on the browser. If a
main menu or a sub-menu is clicked again, the information you have entered
will be cleared.
❒
Depending on the font size setting, the contents may not be displayed prop-
erly. It is recommended to set the font size to “medium” or smaller.
❒
When you shift to another screen during configuration, the configured data
will be discarded at the time.
Example Procedures Using
[ Configuration ] Main Menu
This section gives you a few example
procedures, to make settings of this ma-
chine using the Web Status Monitor.
Configuring [ Scan Settings ]
AAAA
Click [ Configuration ] on the main
menu.
The password input dialog box
appears.
Note
❒
Once you set the password, the
password input dialog box will
not appear from the second
time. When the dialog doesn’t
appear, proceed to
D
.
BBBB
Enter “scanner” for the user name,
and enter the password.
Note
❒
The user name is fixed to “scan-
ner”.
❒
The password is set to “pass-
word” as the factory default.
You can change the password
using
[ Configuration ]
→
[ Basic
Settings ]
→
[ Password ] .
CCCC
Click [ OK ] .
The setup screen appears.
DDDD
Click [ Basic Settings ] , and then [ Scan
Settings ] in the sub-menu area.
EEEE
Click [ Default ] in the [ Select User ]
area.
FFFF
Make settings to each of the setup
items on the screen.
Note
❒
Register the scanning condi-
tions that are most frequently
used in
[ Default ] . If scanning
conditions are not specified for
a Send Scan operation, the con-
ditions set to
[ Default ]
applies.
GGGG
Click [ OK ] .
Note
❒
Be sure to click [ OK ] to save the
settings you have made on the
currently displayed screen.
Once you move to another page
without clicking
[ OK ] , all the
settings that you have made on
t h e p r e v i o u s p a g e w i l l b e
cleared.
❒
The changes are be discarded if
you click
[ Cancel ] .
HHHH
By selecting [ User 1 ] , [ User 2 ] , or
[ User 3 ] in the [ Select User ] area, re-
peat steps
FFFF
and
GGGG
for each of
them, as necessary.