36
(10)11:
When “Closed”, the AC Drive EF alarm.
(11)12:When1-00 select 0,if this terminal function is available ,the frequency is specified by ACI terminal.
Note:
When both the Up and Down command terminals are “closed”, the AC drive neither accelerates or
decelerates. The output frequency is also held constant.
02-04
External terminal frequency UP/DN key constant speed rate
Factory setting
0.01
Setting range 0.01
～
1.00 Hz/ms
02-05
Digital input response time
Factory setting
20
Setting range 2
～
2000 ms
02-06
Appointed count setting
Factory setting
1
Setting range 1
～
9999
This parameter sets a specified count value, When the internal counter which external terminal TRG is located in
the control circuit ,it starts to count from bottom to the count value, the specified output signal terminal (MO1) will
be closed (assuming 02-09 is set to 3), until the count value (02-07) opened upon arrival.
02-07
Count value agreement setting
Factory setting
1
Setting range 1
～
9999
This parameter determines the max. value of the internal counter. The internal counter may be triggered by the
external terminal TRG which is located in the control circuit.
The timing diagram is illustrated as following:
Note1:The min. On time for T2:2ms or more. The min. cycle time for T1:6 ms. or more.
Note2:When arrive MO1 set to count function, the initial status is "ON".
