- 15 -
⑤
Display switchover : This area is used to switch the screen display method. If this area is
touched when the menu screen is displayed, the display will return to the
screen displayed before the menu screen.
Note: This area is displayed in gray if the settings prevent the screen display method from
being selected by touching the screen.
⑥
Data display area : This area displays the dry-bulb temperature (ºC), wet-bulb temperature
(ºC), relative humidity (% RH), and dew point temperature (ºC). Numbers 1
to 4 on the right of the measured values are alarm numbers. When an
alarm occurs, the corresponding alarm number will turn red. Touching a title
(such as "DRY") for two seconds or more will display a list of settings.
⑦
Event display area : This area displays event information such as beginning to record and
record ended.
⑧
Internal memory
: This indicator shows the status of the internal memory. It is lit in red while
the internal memory is being accessed.
⑨
SD memory card status display
: This indicator shows the status of the SD memory card using different colors.
. Gray
: No SD memory card is mounted
(or an SD memory card that is mounted can be removed)
. Light blue : An SD memory card has been mounted.
. Red
: The equipment is communicating with the SD memory card
(Data is being written to the SD memory card, for example)
⑩
Memory usage display (with percentage)
. When an SD memory card is mounted: Free space in the SD memory card is displayed.
. When no SD memory card is mounted : Free space in the internal memory is displayed.
⑪
Main recording display - This indicator shows the status of the main recording-
. Green: Main recording is not in progress.
. Red : Main recording is in progress.
⑫
Sub-recording display - This indicator shows the status of sub-recording-
. Green: Sub-recording is not in progress.
. Red : Sub-recording is in progress.
* The following table shows the main default settings.
・
These settings can be changed using this equipment or the software (Parameter Loader)
provided. However, the original settings will not be retained, so we recommend saving the
original settings to an SD memory card before making changes.
・
Refer to "Saving to SD Memory Card" on page 16 for information on how to save the settings
to an SD memory card.
・
If the input channels are changed, the equipment cannot be used as a hygrometer.
Be careful when changing the settings.
