- 12 -
● Parameter Loader
This software enables various settings for the paperless recorder to be performed on the PC.
The Parameter Loader can be used to read the settings data stored on the SD memory card, or
create or change settings data.
①
Select [All Programs]
– [VM7000A] and then [Parameter Loader] from the
[Start] menu
The Parameter Loader will start.
②
Select [Open] from the [File] menu, and select the desired recorded file in the [Open]
window.
The same operation can be performed by selecting the [Open] icon on the toolbar.
③
Settings data that has been created should be saved in the [Prm] subfolder of the
[Recorder] folder on the SD memory card. Settings data can be loaded into this
equipment.
How to use the paperless recorder (Quick Reference)
This section explains the preparation and operation procedures for storing measurement data.
For details on how to use the paperless recorder, refer to the instruction manual for the paperless
recorder that is stored on the CD-ROM provided.
Caution
Paperless Recorder
・
This equipment has optional functions, however these cannot be used.
・
The [Engineering] key on the menu screen is used for the factory adjustment only.
Do not change the settings for these functions.
・
Note that any loss of or damage to the data stored on the SD memory card falls out of the
warranty.
・
This equipment allows you to change settings or format data as necessary. We recommend
saving important data and settings to other media at regular intervals. Refer to "Saving to
SD Memory Card" on page 17 for information on how to save the settings to an SD memory
card.
・
Do not operate the touch panel with pointed objects such as a pen. Doing so may scratch
the screen.
・
There may be unevenness in brightness due to LCD characteristics, but this is not any
faults.
・
When other functions need to be used, thoroughly read the instruction manual about the
handling of this equipment stored on the CD-ROM before using those functions.
・
If this equipment is used for anything other than its intended purpose, the measurement
accuracy cannot be guaranteed. Be sure to use this equipment only as a hygrometer.
・
If the "Offset" or "Gain" settings have been changed, the equipment will no longer be
covered by the warranty terms including measurement accuracy.
