- 2 -
select a brushless motor when placing your order. The test results under the normal
temperature and humidity conditions demonstrate that the service life of brushless motors is
at least 10,000 hours of continuous operation.
・
Do not operate the touch panel with a pointed object such as a pen. Doing so may scratch
the screen.
Caution
■ Be sure to observe the following precautions in order to use this equipment correctly.
・
Be careful to correctly wire the equipment. Otherwise, the equipment may fail.
・
We recommend the use of protective cover to prevent accidental contact with the wiring part.
・
Be sure to turn off the power supply of the equipment before starting any wiring work to prevent
electrical shock.
(1) To prevent electrical shock, be sure to perform protective grounding before turning on
the power to the equipment.
(2) Do not cut or disconnect the protective grounding wire.
(3) Do not turn on the equipment before connecting the wires or setting up the sensor.
Make sure that the power is off when connecting the wires.
・
Make sure that the power source conforms to the power supply voltage of this equipment.
(1) Power supply rating
: 100 to 240 VAC, 50/60 Hz, 25 VA max.
(2) Operating voltage range : 85 to 264 VAC
Note: The power cord provided is exclusively used for 100 VAC. If the equipment is
used with a different voltage, prepare a cable that matches the voltage and the
shape of the power outlet.
・
Do not use unconnected terminals for any other purposes such as relays.
・
We recommend that the protective grounding wire is not shared with other devices.
If shared, noise from the grounding wire may affect this equipment.
・
Do not operate this equipment in an area subject to flammable gas, explosive gas, corrosive gas,
spattering water, or steam.
Installation location
: Indoors
Altitude
: No higher than 2,000 meters above sea level
Installation ambient
: 0 to 50ºC, 20 to 80% RH (no condensation)
Overvoltage category : Category II
Permissible exposure limits for contaminants
: Level 2
Vibration
: 10 to 60 Hz, 0.2 m/s
2
Impact
: Not allowed
・
This equipment has a built-in battery for a clock. If the battery replacement is required, contact
the store where you purchased this equipment or our service network by all means.
・
Do not carry or move the equipment with the sensor and the paperless recorder connected.
Doing so may cause them to fall, resulting in a very dangerous situation.
