SATELLINE-EASy Pro 35W
User Guide v.1.4
46
The maximum useable sensitivity of the receiver is determined by the channel spacing (=radio
interface data transfer speed) and also by error correction (utilised or not).
In environments with high levels of interference, and when connection distances are short, it is
often beneficial to use a ”Signal threshold level” value, which is approximately 10 – 20 dBm
above the maximum sensitivity level. This will prevent unnecessary receive attempts caused by
noise.
9.2.7
Free channel scan
Free channel scan settings can be set by choosing the 4) Free channel scan from the menu. The
options are as follows:
Enter selection >2
Radio setup
-----------
1) TX power 20W
2) Signal threshold -110 dBm
3) TX start delay 0ms
4) Free Channel Scan RX Slave / OFF
5) Radio compatibility Satel 3AS
6) Call sign OFF
Enter selection or ESC to previous menu >4
Free Channel Scan settings
----------------------------
1) Free Channel Scan mode OFF
2) Type of modem RX Slave
3) FCS Net ID 0000
4) RX listen timeout 500 ms
5) Channel hop threshold -110 dBm
6) Beacon interval 1000 ms
7) Beacon disable timeout 0
8) Add new frequency to list
9) Show free scan frequency list
A) Clear frequency list
Enter selection or ESC to previous menu >
NOTE !
The setting of the transmitter output power of the radio modem to levels in contradiction with
transmitter power levels regulated by local or other governmental authorities is strictly
forbidden. Use or intended use of forbidden transmitter power levels may lead to prosecution
and penalties. SATEL is not responsible for any illegal use practised with any devices
manufactured and/or sold by SATEL and is not liable to pay any damages or compensation
caused by such illegal use.
