SATELLINE-EASy Pro 35W
User Guide v.1.4
48
The new value is displayed in the menu.
To get back to the main menu press ESC (and then E for Exiting and saving).
The address is given in hexadecimal format with four digits and the number of different addresses
is thus over 65 000.
9.2.9
Changing serial port settings (Port 1)
The settings of serial PORT 1 can be modified by selecting main menu selection ”4”. In the
following example, the data transfer speed of PORT 1 is modified (9600 bit/s ->19200 bit/s),
followed by the modification of the number of data bits (8
7), then the number of parity bits
(NONE -> EVEN) and finally the number of stop bits is changed (1
2).
Number 4 is pressed in the Main menu.
Serial port 1
Settings
--------------
1) Port status ON
2) Data speed 9600 bit/s
3) Data bits 8 bit data
4) Parity bits None parity
5) Stop bits 1 stop bit
Enter selection or ESC to previous menu >2
Serial port 1 data speed
------------------------
1) 300 bit/s
2) 600 bit/s
3) 1200 bit/s
4) 2400 bit/s
5) 4800 bit/s
6) 9600 bit/s
7) 19200 bit/s
8) 38400 bit/s
Enter selection or ESC to previous menu >7
Serial port 1
Settings
--------------
1) Port status ON
2) Data speed 19200 bit/s
3) Data bits 8 bit data
4) Parity bits None parity
5) Stop bits 1 stop bit
Enter selection or ESC to previous menu >3
Serial port 1 data bits
-----------------------
1) 7 bit data
2) 8 bit data
NOTE!
The radio modem has one serial port, PORT 1 which complies with the RS-232 standard.
PORT 2 is not in use and the settings of serial PORT 2 cannot be changed.