SATELLINE-EASy Pro 35W
User Guide v.1.4
82
3. Configure the radio modems accordingly. There are two ways to configure the parameters
related to the
Message Routing
:
1.
SaTerm
PC-program
2.
Manual configuration in the setup menu.
In either case, please check the chapter on
Settings
before changing the setup of the radio
modems
.
Finally, when all the radio modems have correct settings, they are ready for further installation.
11.1.4
SaTerm and the configuration of the Message Routing
SaTerm
is a PC based program that allows the user to design their required network simply and
quickly using a graphical interface to literally draw the network plan on the screen.
•
Firstly, a picture of the network is created to show all the radio modems and the intended
route that the data is to take.
•
Secondly, the required settings are defined in the drawing.
•
Finally, the setup of each actual radio modem can be uploaded by connecting the actual
radio modems one by one to the COM port, switching them to the programming mode,
and clicking the transmit button of
SaTerm
.
Please check the user manual of
SaTerm
for more details.
The figure below shows a typical snapshot taken from a
SaTerm
screen.
11.1.5
Manual configuration of the Message Routing
The radio modems can be configured manually via the programming menu. However, this is
recommended only if the structure of the network is very simple, or if it is desirable to define such
special functions that are not possible to draw using the graphical interface of
SaTerm
. Examples
of such cases are for example non tree-structured networks, or the use of same repeaters in
