User
Manual
GSM-4S
38
Allowed numbers – the move to submenu for programming the telephone numbers
accepted by the module.
Tel. No. 1–32 beginning – for these functions it is required to enter the first digits (any
number of digits), or complete telephone numbers, to which the calls can be made via
SIM300CZ telephone – if the "Any number" option is not set. When the Any numbers
option is set, the above mentioned telephone numbers are of no importance. The numbers
to be entered must have the same form as the numbers dialed by the GSM telephone i.e.
must contain area code, for instance: "602 123456", "58 5551122". If the initial digits are
programmed, the dialed number must contain all these programmed digits at the beginning.
Note: The list of telephones 1–32 and the Any numbers option do not affect the
selection of addressee of SMS messages.
Messaging – submenu of functions for programming the data and options for messaging.
Tel. 1–4 for mess. – telephone numbers to which messaging on violation and restoration
of inputs, or activation and switch OFF of output OT4 will be sent. The telephone number
programmed by this function must have a complete form including country and area codes
or cellular network code.
Mess. x2 for T. 1–4 – setting this option for a given telephone number will result in making
a call twice to a dialed number and replaying the voice message each time – while
executing the voice messaging.
Tries for tel. 1–4 – number of attempts to send CLIP to telephone nos. 1–4. It is possible
to program from 1 to 15 attempts.
Ack. CLIP tel. 1–4 – with this option selected, the module will require that the user
acknowledge receiving the CLIP sent to telephone nos. 1–4.
SMS mess 1–4 fail – if you select this option, an SMS message will be sent to the
telephone number, if the module, having completed all the attempts, receives no
acknowledgement of the CLIP reception from the selected telephone.
SMS violat. In.1–4 – contents of SMS message to be sent to cellular telephone number
after violation of a given input (indication on LCD display i
Æ
I). It is possible to choose
a standard contents or to enter your own message. (up to 32 characters).
SMS fail. line – contents of SMS message to be sent to cellular telephone number after
activating the output OT4. You can select standard contents
(
phone line failure
)
or enter
your own message (up to 32 characters).
SMS restor. In.1–4 – contents of SMS message to be sent to cellular telephone number
after the input is restored to normal state (I
Æ
i).
SMS restor. line – contents of SMS message to be sent to cellular telephone number after
restoration of input OT4 to normal state (telephone line available and operative).
SMS test – contents of SMS message to be sent to cellular telephone number in a test
message.
SMS tst. w.state – enabling this option will result in information on the current status of the
module outputs/inputs and the telephone line being attached to the SMS contents for test
transmission.
TL ok, mess.IN1–4 – if this option is disabled for the particular zone, messages from
this zone are sent only in case of the cable telephone line failure.
In. 1–4 -> Tel. and F. L. -> Tel. – programming the options for messaging. These options
are used for selecting telephone numbers, to which the messages shall be sent after
violating the input or after failure of telephone line, and for choosing the type of messaging
(SMS/CLIP/VOICE). The option is set by pressing push-button CHANGE. The successive
pressing makes the character display at the telephone numbers:
