Poids spécifique
Fonction :
Grâce à ce programme d’application, il est possible de déterminer le poids
spécifique d’un échantillon. Le résultat est toujours affiché avec une décimale. Installation
: poser un récipient en verre sous la balance. Accrocher une corbeille immergée dans de
l’eau au crochet de pesée en dessous du socle (pas livrée avec la balance).
Exemple :
déterminer le poids spécifique d’un échantillon solide.
Etape
Appuyer sur la touche
Affichage
1. Changer de programme d’application
(Zero) longuement
2. Sélectionner « Poids spécifique »
plusieurs fois (F)
3. Confirmer le réglage
(Enter)
Symbole « » à l’affichage : l’application est active
4. Tarer la balance si nécessaire
(Zero)
5. Démarrer l’application
(F)
6. Confirmer l’affichage «
airval
»
(Enter)
7. Déterminer le poids de l’échantillon dans l’air :
poser l’échantillon sur la balance
8. Mémoriser la valeur de pesée déterminée dans l’air
(Enter)
9. Retirer l’échantillon de la balance
10. Déterminer la valeur de pesée dans le liquide :
mettre l’échantillon dans la corbeille
11. Immerger l’échantillon dans le liquide
12. Confirmer l’affichage «
water
»
(Enter)
13. Mémoriser la valeur de pesée déterminée
(Enter)
dans le liquide et afficher le résultat
14. Effacer le résultat
(Zero)
15. Terminer l’application «Poids spécifique»
(Enter) longuement
16. Activer à nouveau le «poids spécifique» si aucun
(F)
autre programme d’application n’a été sélectionné
entre-temps.
17. Le cas échéant, continuer au point 5.
55
PK Elektronik Vertriebs GmbH, E-Mail: [email protected], Internet: www.pkelektronik.com