39
Fehlermeldungen
Fehlermeldungen werden in der Hauptanzeige für ca. 2 Sekunden dargestellt.
Danach kehrt das Programm automatisch in den Wägezustand zurück.
Anzeige
Ursache
Abhilfe
Keine Anzeigesegmente
Keine Betriebsspannung
Stromversorgung überprüfen
erscheinen
Netzgerät nicht
Netzgerät an die
eingesteckt
Stromversorgung anschließen
Batterie oder Akku ist leer
Batterie wechseln Akku aufladen mit
externem Ladegerät
oL
Wägebereich überschritten
Waagschale entlasten
UL
Waagschale nicht aufgelegt
Waagschale korrekt auflegen
Berührung zwischen
Waagschale darf umgebende
Waagschale und Umgebung
Teile nicht berühren
disErr
Anzeigeüberlauf: Wägegut
verringern
Auszugebender Wert in
der Anzeige nicht darstellbar
calErr
Justierbedingung wurde
Waage entlasten
nicht eingehalten, z.B.:
Tarieren mit Taste (Zero)
– Nullstellen
Erst nach Nullanzeige justieren
– Waagschale belastet
appErr
Gewicht zu gering oder
Gewicht erhöhen
kein Wägegut auf der Waagschale
bei Anwendungsprogrammen
PrtErr
Datenschnittstelle für
Sartorius-Kundendienst ansprechen
Druckausgabe gesperrt
bal.Err
Gerät beim Einschalten belastet
Vor dem Einschalten: Waage entlasten
oder defekt
oder Sartorius-Kundendienst anspre-
chen
sys.Err
Gerät defekt
Sartorius-Kundendienst ansprechen
Max. Wägebereich
Waage ohne aufgelegte
Waagschale auflegen
kleiner als im Abschnitt
Waagschale eingeschaltet
Aus- und wieder Einschalten
»Technische Daten«
mit Taste
e
angegeben
Offensichtlich falsches
Waage nicht justiert
Justieren
Wägeergebnis
Vor dem Wägen nicht tariert
Tarieren
Falls andere Fehlermeldungen auftreten, Sartorius-Kundendienst anrufen!
PK Elektronik Vertriebs GmbH, E-Mail: [email protected], Internet: www.pkelektronik.com