User Manual
.
Version 1.2
6
1. Introduction
The Transmitter and Receiver incorporate HDMI™ technology, allowing you to
transmit HD Video anywhere in your home using existing Power lines. This avoids
the complexities of rewiring your house or buying new Video Equipment (e.g. Video
Players) for each viewing room. This system consists of a receiver and a
transmitter that deliver H.264 HD video and high quality audio from Blu-ray™
players, Set-Top boxes, and video game consoles (etc.) to compatible HDTV
displays located near power outlets. Setup is fast and easy; the Video Player (e.g.
Blu-Ray player) is connected to your Transmitter while your HDTV is connected to
the Receiver; both Receiver and Transmitter are connected to Power Outlets.
PowerHDLink also allows you to use IR Remote Controllers to control A/V
equipment (stop/start/FF/Rewind etc.) remotely using IR signals.
Video/audio PLC Kit Contents
The PLC kit contains the equipment below. If any components are missing or
damaged, contact your dealer immediately.
Package Contents
A.
Transmitter BOX
B.
Receiver BOX
C. Power Cord (x2)
D. IR Blaster cable
E.
Remote Control
F.
HDMI Cable (x2)
In addition to the kit, a video player (DVD player, Blu-Ray player etc.) and a TV
(HDTV or Standard TV) are needed.
Note 1
: “TX” and “RX” may be substituted for “Transmitter” and “Receiver”
(respectively) throughout this manual.
Note 2
: Power Cord specifications will vary, depending on country or region.