User Manual
.
Version 1.2
15
4 Video Source Remote
Control
With the AV PLC system, you can control your video player from the remote
location (i.e. where RX is located) using the Video Player’s remote controller (must
be Infrared Remote Controller). The RX is fitted with an IR sensor that receives
the signals and sends them over the power lines to the TX, where the TX re-emits
the same IR signals to the video player.
Step 1: Attach IR Blaster Cable to TX
Connect the IR Blaster Cable to the back of the Transmitter (IR Out-1 adapter).
Step 2: Place IR Blaster Tab
Situate the IR Blaster tab in front of the Video
Player IR sensor or use the double sided sticker on
the tab and stick it onto the Video Player, near the
IR sensor.
The setup is complete. You can try the remote
controller on the Receiver.
