User Manual
.
Version 1.2
14
Step 2: Pairing procedures for troubleshooting
“Pairing” refers to the process where two
independent systems (i.e. RX and TX)
identify themselves and establish/re-
establish communications over a common
medium (i.e. Power Lines). You can use
these procedures when troubleshooting your
system (i.e. Video fails to appear on TV
connected to your RX).
The flowchart to the right will instruct you on
how to proceed in order. The “Video
displaying?” diamond refers to video on the
TV attached to the RX. The procedures in
the boxes are explained in the Appendices
as listed below:
RX/TX Pairing –
Appendix 1
PLC Pairing –
Appendix 2
Reset RX/TX PLC to Factory Defaults –
Appendix 4
Reset RX/TX to System Defaults
–
Appendix 3
It is assumed that RX, TX and video
equipment are all properly connected and
powered on.
Note
: It is highly recommended that you
perform these procedures with the RX and
TX in the same vicinity, preferably attached
to the same power outlet.
