User Manual
.
Version 1.2
13
3. Troubleshooting
If no video displays on the remote TV attached to your RX, proceed with the steps
below:
Step 1: Check connections, power and equipment
Make sure all power connections are secure and power is supplied to all
equipment.
Inspect all cables and cable connections between Player-TX and TV-RX.
Make sure the Video Player is working properly and is transmitting video (hook
up a TV directly to the player to confirm). Also, make sure the TV that is
attached to the TX is in working order.
Make sure that the Source LED indicator matches the physical connection
between the TX and player that is connected to it. The LED indicators are
described in the table below.
1
HDMI connector 1
AV1
CVBS/S-Video
AV2
YPbPr connectors
e.g. If you attached a Blu-Ray player to your Transmitter using YPbPr, but
your Source LED indicator “1” is illuminated (HDMI port1), the transmitter is
looking on the wrong input connector. Simply press the Source button (see
above) on the TX until the appropriate Source LED indicator illuminates (AV2
in this example).
If video still does not display, go to Step 2.
