Sargent v.G1.5, Руководство по установке

Страница: 13 / 28

1-800-810-WIRE • www.sargentlock.com • A7856C 13
Profile Series v.G1.5 Rim Exit Device
Copyright © 2016, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
10/31/16
Step 9 – Install and Secure Inside Escutcheon
1. Secure the inside escutcheon using two #8-32
screws through top and bottom of the
escutcheon (Fig. 9).
Thread into outside escutcheon.
2. Straighten escutcheons and tighten securely,
being careful to avoid pinching wires.
Battery Cover
Security
Screw
Security Tool
(P/N 01-0297, Included
Battery Keeper
Fig. 9
Step #10 – Install and Remove Batteries*
A. Install Batteries and Keeper
1. Place (6) “AA” batteries into the compartment, being careful to properly align polarity (Fig. 10A).
2. To install battery keeper, insert the tabs on the bottom of the keeper into the battery compartment slots
and press the keeper tightly against batteries and inserting tabs into bottom slots.
• For RF technology, use RF Technology lock information 20.
IMPORTANT :
*
Do not install batteries if controller is powered by external power supply.
• Test for proper operation before closing door.
B. Remove Battery Keeper
To remove the battery keeper, pull the keeper away from the batteries (Fig. 10B).
Fig. 10B
+
-
+
+
-
+
Fig. 10A
Bottom Tabs
(Battery Keeper) Keeper Tabs
Battery Keeper
Tip Out