Passport 1000 P2 WiFi Exit Device
Copyright © 2014, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
03/31/14
11 1-800-810-WIRE • www.sargentlock.com • A8012F
Secure chassis cover to chassis using
(4) #8-32 x 5/16” oval head machine
screws (Fig. 8).
1. Position the wire cover plate above the
chassis cover and covering the wire channel.
Mark hole positions.
Note: Make sure stamped side of plate is against door.
2. Drill (2) 3/32” diameter by 1/2” deep holes (Fig. 9A).
3. Cover wires with cover plate by securing plate to
door directly above chassis (note orientation) using
two (2) #6 x 1/2” flat head security torx wood screws
(Fig. 9B).
Note: Position lower edge of cover plate against the
cover to ensure that no wires are visible.
This Side Down
Fig. 9B Detail
Back Side of
Wire Cover Plate
8 Install Chassis Cover
9 Install Wire Cover (Wood Doors Only)
(2) #6 x 1/2” Flat
Head Security
Torx Wood Screws
Inside of door
Fig. 9A
Wire Cover
(2) 3/32” Diameter by
1/2” Deep Holes
Fig. 8
