03/31/14
Passport 1000 P2 WiFi Exit Device
23 1-800-810-WIRE • www.sargentlock.com • A8012F
Fig. 11A
Board-to-Board
Connectors
Fig. 11B Detail
1. Insert bottom tab of controller into slot on mounting plate (Fig. 11A, B).
2. Looking down from top of controller, ensure proper alignment of board-to-board connectors (Fig. 11B)
while pivoting controller toward door until two tabs on top snap securely into place on mounting plate.
CAUTION
: To avoid possible damage to board-to-board connectors, care should be taken when securing
controller to mounting plate. If there is resistance when securing, detach controller to determine
cause before re-attaching controller.
Fig. 11B
11 Installing the Controller
Fig. 11A
Detail
