Sargent and Greenleaf 6128 Скачать руководство пользователя страница 27

Страница: 27 / 32

630-600

MODEL 6128/6129 PROGRAMMING & OPERATIONS GUIDE

4.3 — Service Mode Operation Codes

Service Mode operation codes may only be generated by the Lock Management System for

locks that have been previously initialized . The Operation codes are eight digits in length and will

be valid for only one use . If the operation code is not used, the code will expire at the end of the

time window specified by the operator of the Lock Management System at the time the code was

generated .

Each operation code is specific to the lock being addressed, the user, his four digit PIN code,

the touch key being presented, the request being made, and the date and time the code is valid .

4.3.1 — Access Lock:

The lock management software can create an eight-digit code for use by both Users and

Management Users . It is valid for only one use at the specified lock within the specified time

window .

Example

Step 1.

User places his touch key in reader .

Step 2.

User inputs his four digit PIN and presses the # key .

Step 3.

User inputs the eight digit operation code and presses the # key .

Step 4.

Lock illuminates Amber “Mode” indicator during processing of code .

Step 5.

Lock indicates successful result with Green “Status 1” indicator

and three beeps .

Step 6.

Lock is unlocked . User may open the door and perform

the desired function .

Step 7.

When the door is closed, the lock prompts the user to present the touch key

to capture the secure code .

Step 8.

User places touch key in reader . Lock indicates successful transfer of

“secure” code to touch key with Green “Status1” indicator and three beeps .

Step 9.

User removes touch key .

4.3.2 — Program Bank Features:

This is a management only operation code that is used to set the bank operational features of

the lock . This code does not open the lock .

• The programmable features that may be set with this code are:

• Bank mode enabled or disabled .

• Time window of operation for bank users if enabled .

• Access to audit log through bank operations .

Example

Step 1.

User places his management touch key in reader .

Step 2.

User inputs his four digit PIN and presses the # key .

Step 3.

User inputs the eight digit operation code and presses the # key .

Step 4.

Lock illuminates Amber “Mode” indicator during processing of code .

(cont .)

Содержание 6128

































Результаты поиска

Содержание 6128

Отзывы:

Похожие инструкции для 6128

Бренды по названию

Популярные бренды

Sargent and Greenleaf 6128, Руководство по программированию и эксплуатации

Результаты поиска

Содержание 6128

Отзывы:

Похожие инструкции для 6128

Бренды по названию

Популярные бренды