58
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
sbdconfig - Clock Settings
Clicking on the Clock Settings tab will allow a user to program the following settings:
1. Clock Name - This field allows a user to assign the clock a unique name, such as its location in
a facility. The name cannot exceed 24 characters.
2. Clock Number - This field allows a user to assign a unique number to a clock. This number is
used when commanding a specific digital clock from the Master Clock Web Interface. Please
refer to the master clock manual associated with your system for more information.
3. Zone - This field allows a user to enter a number (1-99) for the clock’s zone. A zone is a
collection or grouping of clocks within a certain section of a facility. This number is used when
commanding a designated group of digital clocks from the master Clock Web Interface. Please
refer to the master clock manual associated with your system for more information.
4. Blink Colon After - The colon on the digital clock display has the ability to blink in order to
signify a loss of communication with the master clock. These fields will let the user choose how
long after a loss of communication the clock will wait before the colon starts to blink.
5. Input Type - Selecting an item from this drop-down menu allows the user to select a primary
input source for accepting new time data.
A wireless clock should have RF set as its input.
6. Once all of the Clock Settings are chosen, click the ‘Update Clock’ button to store the selected
options or, when all the tabs have been programmed, click the ‘Load Clock’ button located on
the menu bar to store all options.
6
5
2
3
4
1
