manualshive.com logo in svg

Sapling SBT Series, Руководство по установке

Поделиться
Скачать
Sapling SBT Series Скачать руководство пользователя страница 55

55

The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA

P. (+1) 215.322.6063 
F. (+1) 215.322.8498
www.sapling-inc.com

Configurations 

•  Save Configuration: After the clock’s settings are chosen, this option will save the configuration to 

the computer.

•  Load Configuration: This option will allow a user to load the previously saved configuration from 

the computer. 

sbdconfig - Task Bar (ctd.)

Read Clock 

•  If a user has a previously configured clock and connects it to a computer, this option will read and 

upload the settings to the sbdconfig software program. Once the ‘Read Clock’ button is clicked, 
another window will open that will signify the upload process (Fig. 2).

Load Clock

•  The ‘Load Clock’ button will allow a user to change multiple settings within the SBDconfig software 

tabs. This eliminates the need to click ‘Update Clock’ on each screen. When the ‘Load Clock’ button 
is clicked, another window will open showing that the download is in progress (Fig. 3).

(Fig. 2)

(Fig. 3)

Version

•  The Version button displays the number of the software version.

Содержание SBT Series






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды