Sapling NTP 8000 Series Скачать руководство пользователя страница 60

Страница: 60 / 76

The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA

P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com

Web Interface - Individual Settings

1. Send Number -

Allows the user to choose a 4-digit number from 0000 to 9999 to be sent to

applicable digital secondary clocks. This number will appear on the display of whichever digital clock
receives it.

2. Repeat every 10 seconds -

Allows the user to extend the length of time that clocks display the sent

number. For example, entering a value of 2 will cause the sent number to display for 20 seconds.

3. Send Number to All Clocks -

When checked, sends the 4-digit number from

Send Number

to ALL

applicable digital secondary clocks when the

Submit

button is pressed. The number will appear on the

clock for 20 seconds, then the clock will return to displaying the time.

4. Clock Number -

Allows the user to send the 4-digit number from

Send Number

to a specific digital

secondary clock when the

Submit

button is pressed. A secondary clock’s number may be set through

the digital clock sbdconfig interface* or front panel buttons**. See the digital clock manual for more
information.

5. Zone Number -

Allows the user to send the 4-digit number from

Send Number

to all digital

secondary clocks within a preset, named region when the

Submit

button is pressed. A digital clock’s

“zone” may be set through the digital clock sbdconfig interface* or front panel buttons**. See the digital
clock manual for more information.

6. Set Bell Indicator -

Clicking on a box causes all the digital clocks in the system to display “BELL” when

the selected master clock relay is activated.

7. Submit -

This button, when pressed, saves and applies all the selections to the Master Clock.

*sbdconfig is only available for 3200/3300 models of the SBD,SBL, and SBT digital clocks.
** Button-based configuration is only available for 3300 models of the SBD,SBL, and SBT digital clocks.

NOTE:

Number messages cannot be sent to SBP clocks through the master clock.

Содержание NTP 8000 Series













































































Результаты поиска

Содержание NTP 8000 Series

Отзывы:

Похожие инструкции для NTP 8000 Series

Бренды по названию

Популярные бренды

Sapling NTP 8000 Series, Руководство по установке

Результаты поиска

Содержание NTP 8000 Series

Отзывы:

Похожие инструкции для NTP 8000 Series

Бренды по названию

Популярные бренды