-12-
FAN908
FAN904
FAN907
FAN903
FAN905
DUCT f
or F
AN903 & 4
HOLDER f
or F
AN908
HOLDER f
or F
AN905
DUCT f
or F
AN905
DUCT f
or F
AN907
AC
SW UNIT
E
A
A
A
A
A
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
D
D
D
D
D
D
D
D
E
E
E
E
E
E
E
F
F
F
F
F
F
GX4
GX4
The direction of a wind.
Adjustable foot.
Handle
Adjustable foot.
A
A
A
A
B
B
B
B
FN910
FN909
Assembly fan
C
C
C
C
FN911 FN912
Caution
The following caution is the important mat-
ter for maintaining the safety of a product.
1.
Don't mistake the attachment direction of the cooling fan in the
case of a re-assembly. (Refer to the arrow in a figure.) If the
attachment direction is mistaken, it will become the cause which the
inside of the projector is unusually overheated and a fire or parts dam-
age.
2.
Careful marking of the Fans before their removal from the cabi-
net bottom, will ensure proper reassembly.
1. See caution-2 before the fans removal.
2. Remove 5 screws A and remove the duct for FN907 and remove the Fan
(FN907).
3. Remove 9 screws B and remove the Fans (FN903 and FN904) and
remove the duct for FN903/4.
4. See caution-1 before the Fan (FN908) removal. Remove 8 screws C and
remove the holder for FN908 and remove the Fan (FN908).
5. Remove 8 screws D and remove the holder for FN905 and remove the
Fan (FN905) and remove the duct for FN905.
6. Remove 8 screws E and remove the AC switch unit.
7. Remove 4 screws F and remove 2 pins F and remove the handle.
8. Remove 8 screws G and remove the adjustable feet.
8.
Fans(FN903, FN904, FN905, FN907 and
FN908),
AC SW unit,
Handle and
Adjustable feet removal.
1. Remove 4 screws A and remove the fan
FN909 and remove the fan FN910.
2. Remove 4 screws B and remove the
assembly fan.
3. Remove 4 screws C and remove the fans
FN911 and 912.
7.
Fans(FN909, FN910, FN911
and FN912) removal.
Содержание WF10 - PLV WXGA LCD Projector
Страница 67: ... 67 CXA3562R LCD DRIVER FF ...
Страница 113: ......
Страница 114: ...SANYO Electric Co Ltd Jan 2004 400 Printed in Japan ...