-15-
LCD panel /Prism
assemb
ly
Blue LCD P
anel
Red LCD P
anel
Green LCD P
anel
Never touch
the electrode of flexible cables.
A
A
A
A
B
B
B
LCD panel /Prism assembly
5.
LCD panel /Prism assembly and LCD panel
removal.
1. Remove 4 screws A and remove the LCD panel /Prism assembly. To readjust some of
the adjustment items is needed after reassembly. See note-1.
2. See note-2, before the LCD panel removal.
3. Remove 3 screws B and remove the LCD panel. To readjust some of the adjustment
items is needed after reassembly. See note-1.
Don't touch the electrodes on
flexible cables.
Figure may be different from actual parts.
Note :
■
Note-1 Readjusting is needed. :
When the LCD panel /Prism assembly or the LCD-panel
is replaced with new one, readjust the following adjust-
ment items.
* Focus adjustment of LCD Panel
(See page 45.)
* Convergence adjustment of LCD Panel
(See pages 46-47.)
* 12. Flicker reduction
(See page 42.)
* 13. White balance adjustments
(See page 42.)
* 14. Unevenness color correction
(See page 42.)
But when the whole LCD panel /prism assembly is
replaced with new one, to readjust the “Convergence
Adjustment of LCD Panel” is unnecessary. (Factory
Convergence adjustment of LCD panel for new LCD
panel /prism assembly has completed.)
■
Note-2 :
Don't remove the LCD panels Red, Green and Blue
simultaneously! It becomes impossible to adjust a con-
vergence, if all the LCD panels are simultaneously
replaced. When all the LCD panels are damaged, we rec-
ommend to replace the whole LCD panel /prism assem-
bly with new one.
Caution:
Handle with care !
The LCD panel/Prism assembly is a precision part. Be sure to handle this part
with special attention. Observe the following notes.
1. Be careful not to hit the LCD panel with the screwdriver. It may damage the parts and
alignment.
2. Don't touch the LCD panel and prism part directly with hand. Otherwise
the optical parts may get dirty.
3. Since the LCD panel is equipped with
CMOS-LSI
, pay attention to stat-
ic electricity. And don't touch the electrode on flexible cable.
Содержание WF10 - PLV WXGA LCD Projector
Страница 67: ... 67 CXA3562R LCD DRIVER FF ...
Страница 113: ......
Страница 114: ...SANYO Electric Co Ltd Jan 2004 400 Printed in Japan ...