-8-
Lamp counter reset
Move pointer to Lamp counter reset and then
press SELECT button.
Move arrow to
replaced lamp number (Lamp 1 or Lamp
2) and then press SELECT button.
Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP
REPLACE indicator stops lighting.
Turn projector on, press MENU button and ON-SCREEN
MENU will appear. Press POINT LEFT/RIGHT button(s) to
move a red frame pointer to SETTING Menu icon.
1
Press POINT DOWN button to move a red frame pointer to
“Lamp counter reset” and then press SELECT button.
2
Another confirmation dialog box appears and select [Yes] to
reset Lamp Replace Counter.
4
Move arrow to replaced lamp number (Lamp 1 or Lamp 2) and
then press SELECT button. Message "Lamp replace counter
Reset?" is displayed. Move pointer to [Yes] and then press
SELECT button.
3
NOTE: Be sure to reset correct lamp number otherwise LAMP
REPLACE indicator continues lighting.
Message "Lamp replace counter Reset?" is
displayed. Move pointer to [Yes] and then
press SELECT button.
1
2
MY6A
Caution : Burst
Do not reset
LAMP REPLACEMENT COUNTER
except
after projection lamp is replaced. Failure to observe
this caution, when the useful life of the lamp passes, the
LAMP REPLACE
indicator do not light. It will have
been using the lamp over which the useful life passed.
It may cause the burst of the lamp.
Содержание WF10 - PLV WXGA LCD Projector
Страница 67: ... 67 CXA3562R LCD DRIVER FF ...
Страница 113: ......
Страница 114: ...SANYO Electric Co Ltd Jan 2004 400 Printed in Japan ...