E-13
Hook
Lift
Cotton
Swab
Tab
Hooks
Hook
Cap
Cover
Hook
Electrolyzed
Water Cover
Sterile-Electrolytic
Mist Generator
Tank
Electrolyzed Water Unit
Cover
[Rear]
Cleaning Methods
Electrolyzed Water Unit/Tank
Always remove the power plug from the wall outlet.
Warning
Note:
¡
Do not wash any other components except the tank and electrolyzed water unit. This may
cause an electric shock or malfunction.
¡
Do not use detergents. This may cause malfunctions.
Note:
¡
Use a towel to ensure that the floor does not get wet from water attached to the electrolyzed
water unit and tank.
1
2
5
6
3
4
7
8
Remove the cover, tank, and
electrolyzed water unit.
¡
Lift the tank straight up.
Remove the electrolyzed water cover.
¡
Remove the cover from both sides (lift to
remove the electrolyzed water cover).
Wash the tank and electrolyzed water
cover with water.
¡
Rinse clean with water. Use a toothbrush to
remove the dirt if extremely dirty.
In the event of limescale build up on
the Sterile-Electrolytic Mist Generator,
clean with white vinegar to remove the
limescale. Do not use water as this
may cause the unit to malfunction.
Wipe off any water and dry completely.
Re-assemble the electrolyzed water
unit and replace.
¡
Place the side tabs of the electrolyzed water
unit cover to the bottom and press the hooks
on both sides.
Close the cap on the tank and replace.
Replace the cover.
¡
Push from above.
ABC-VW24A_GB_US.qxd 09.10.1 4:52 PM ページ13
