E-8
Press
Press
Press
When cleaning the air and removing
odors in the room automatically
Method of Use
Operation of the Odor Sensor
1
2
AUTO
LOW
MED
HIGH
Note:
¡
Toxic substances (carbon monoxide, etc.) from cigarettes cannot be eliminated.
¡
Odor components (odors from building material, pets, etc.) that are continuously generated
cannot be entirely eliminated.
Color of Clean Indicator and Operating Status (Air flow indicator lamp does not turn on)
The generated volume of sterile, electrolytic mist is intermittent with Low (small) and Strong (large).
The odor sensor operate automatically when set to automatic operation mode.
¡
The odor sensor responds to cigarette smoke, insecticides, cosmetics, alcohol, gases generated by burning
appliances, and sudden changes of temperature and humidity.
Cleanliness
Color of Clean Indicator
Operating
Status
Fan
Sterile, Electrolytic Mist
Green
Yellow
Red
Stop
Low
Medium
Stop
Low
Low or Strong
Clean
Very Dirty
Manual Operation
The device can be operated according to preference. Normally, it is recommended that automatic operation is
selected to operate automatically in response to the cleanliness of the air. When the automatic operation, adjust
the sensitivity of the odor sensor (refer to page E-7).
Press the power on/off button.
¡
Press the power on/off button to operate in [AUTO/Electrolyzed
Water “On”] mode after plugging in the power plug.
¡
The electrolyzed water and clean lamps turn on.
(The electrolyzed water lamp turns on while operating the
electrolyzed water function).
Press the fan speed button and operate according
to preference.
¡
The operating mode switches with each press of the button and
the mode is indicated by the corresponding lamp.
¡
Press the fan speed button and operate in “AUTO”.
¡
Operates automatically when the odor sensor detect dirt or
odor in the air of the room.
¡
A sterile, electrolyzed mist is produced (the electrolyzed
water function generates a sterile, electrolyzed mist).
Press the electrolyzed water button to turn off the
electrolyzed water.
¡
The electrolyzed water function cannot be operated
independently.
* Even when the air of the room is clean, the electrolyzed
water function operates silently for about 5 minutes, once
every hour, to agitate the water.
Automatic Operation
English
ABC-VW24A_GB_US.qxd 09.10.1 4:52 PM ページ8
