E-12
Odor Sensor
Pre-filter
Unit
Filter
Odor Sensor
Cleaning Methods
Always remove the power plug from the wall outlet.
Warning
Note:
¡
Do not tilt the unit when cleaning. Water from the tank and electrolyzed water unit will spill.
¡
Do not use petrol, paint thinner, or any other solvents or polishing powders.
This may cause scratches, discoloration, and cracks.
¡
Clean the dust by using a vacuum cleaner.
It is recommended that the device is cleaned once every
3-6 months. (Remove the front cover. Refer to page E-5.)
It is recommended that the filter is cleaned once per year to ensure the air is effectively cleaned.
¡
Use a vacuum cleaner to remove any dust from the surface of the filter. Ensure that the filter does not tear when
the mouth of the vacuum cleaner is firmly pressed against the filter. (Remove the filter after removing the front
cover and pre-filter. Refer to page E-5.)
¡
Remove the front cover and pre-filter (refer to page E-5).
¡
Use a vacuum cleaner to remove dust.
¡
Wash with water if extremely dirty and dry completely.
¡
Soak a soft cloth in diluted neutral kitchen detergent, wring
it dry, and wipe.
Use a vacuum cleaner to remove dust from the air inlet and
outlet.
Lastly, wipe with a dry cloth.
Continue in the following
English
ABC-VW24A_GB_US.qxd 09.10.1 4:52 PM ページ12
