Sanwa mg5000, Инструкция по эксплуатации, Страница: 4 / 28

− 1 −
[1] SAFETY PRECAUTIONS
-Before use, read the following safety precautions.-
Thank you for purchasing the Sanwa MG5000 high voltage digital
insulation resistance tester. Before use, please read this manual
thoroughly to ensure correct and safe use. Keep this instruction
manual together with the product.
Be sure to read the information under “ WARNING” and
“ CAUTION” that is intended to prevent personal injury such as
burn and electric shock and other serious accidents.
1-1 Explanation of Warning Symbols
The meaning of the symbols used in this manual and attached to
the product is as follows.
: Very important instruction for safe use.
• The
WARNING
messages are intended to prevent accidents to
operating personnel such as burn and electrical shock.
• The CAUTION messages are intended to prevent incorrect
handling and measurement which may damage the product.
Symbols attached to the product
: Symbol soliciting reference to this manual before use
: Do not touch this part because a dangerous high voltage is applied
: Double or enhanced insulation
: Earth (ground)
: The AC incorrect input protection voltage in the insulation
resistance measurement is 1000 V
1-2 Warning Instruction for Safe Use
The following instructions are intended to prevent personal
injury such as burn and electric shock. Be sure to follow them
when using the tester.
1. Although the tester is equipped with the voltage
measurement function, never use it to measure voltage of
electric circuits that exceed CAT.IV 600 V/CAT.III 1000 V.
2. Pay special attention when measuring the voltage of AC 33 V
rms (46.7 V peak) or DC 70 V or more to avoid injury.
3. Never input signals exceeding the maximum rated input
value (see
1-3
).
4. Never use the tester for measuring voltage of lines connected to
equipment (e.g. motors) that generates induced or surge voltage
since it may exceed the maximum allowable overload input.
WARNING