Sanwa mg5000, Инструкция по эксплуатации, Страница: 22 / 28

− 19 −
[8] SPECIFICATIONS
8-1 General Specifications
AC sensing Average value
LCD 1200 counts
Bar graph : 36 points
DAR/PI value : 9.99
Timer : 99 : 59 (min. : sec.)
Sampling rate Approx. 3 times/sec.
Overload indication V function : “OL” displayed with buzzer beep
Insulation function : "OL" displayed
Range selection Auto range only
Polarity switching Auto switching (only “−” is displayed)
Battery Monitor 4-step indication (see 4-7 )
blinks at about 7.5 V or less (accuracy
no longer guaranteed)
Environmental
condition
Altitude 2000 m or below, indoor use, pollution
degree II
Operating
temperature
/
humidity
0-40 ºC, max. relative humidity 85 % (no
condensation)
Storage temperature/
humidity
-10-60 ºC, max. relative humidity 90 %, no
condensation (with batteries removed)
(Batteries should be removed before storage
for a long period.)
Power supply “C”-size alkaline battery 1.5 V (LR14) x 8
Auto Power Off Power OFF in about 10 minutes after last
operation.
Max. power
consumption
Approx. 18 VA (measurement at 5000 V/
approx. 1.8 MΩ)
Measurement count 1000 times (5000 V/5 MΩ measurement, 5 sec.
ON/25 sec. OFF)
Dimensions & mass 188( H ) x 225( W ) x 97( D ) mm, approx. 1750 g
(batteries included)
Year of production Initial 2 digits of the main unit serial No.
indicates the last two digits of year (20**).
IP class IP54
Safety standards IEC61010-1 CAT.III 1000 V/IV 600 V
IEC61010-2-030, IEC61010-031. IEC61557-1 & 2