Bedienungsanleitung / User manual
VDC-727IR-WM, VDC-727IR-WBJB
_________________________________________________________________________________
- 74 -
Follow the instructions displayed on the video picture.
Press „IRIS CLOSE“ on the keyboard to exit the menu.
By using the keyboard (e.g. SANTEC KSC-3505) you are able to directly program presets.
Use the joystick to select the desired preset position. On the keyboard, select a preset
number, e.g. 001. Press the SHIFT key and then the PRESET key.
There are a number of preset functions already assigned by the protocol.
This means that you can start, for example, a pattern or a vectorscan via a preset.
Pre-assigned preset functions:
PRESET
FUNCTION
DESCRIPTION
57
Open
OSD camera module
80
Pattern
Start pattern 1
81
Pattern
Start pattern 2
82
Pattern
Start pattern 3
83
Vectorscan
Start vectorscan 1
84
Vectorscan
Start vectorscan 2
85
Vectorscan
Start vectorscan 3
86
Vectorscan
Start vectorscan 4
87
Vectorscan
Start vectorscan 5
88
Vectorscan
Start vectorscan 6
95
Open
OSD dome
101
Pan
Start endless panning
If you move the joystick on the keyboard, you can stop the started pattern/vectorscan/pan
function again.
Are you sure you want to do this?
Iris open to confirm.
Iris close to exit.
