Bedienungsanleitung / User manual
VDC-727IR-WM, VDC-727IR-WBJB
_________________________________________________________________________________
- 66 -
3. Speed dome setting via OSD menu
Note:
The OSD menu can only be accessed by an optionally available keyboard/control panel
including joystick (not included in the speed dome delivery).
The following pages in this manual describe the OSD settings using a SANTEC KSC-3505
keyboard.
The camera is set to factory default and is ready for immediate use.
If, however, you need to change these default settings, you can do it by using an optional
keyboard including joystick (e.g. SANTEC KSC-3505 keyboard; not included in the speed
dome delivery) to call-up the OSD menu.
Factory default settings: Pelco-D protocol, 2400 Baud, ID-001.
Please ensure that the keyboard is set to the same communication parameter as the dome
camera.
To call-
up the OSD menu of the dome camera, please enter the command „PRESET 95“ on
the keyboard. Now you can move the joystick left/right/up/down to go to the desired menu
item.
If a confi
rmation is required in the OSD menu, please enter „PRESET 95“ on the keyboard or
press „IRIS OPEN“.
Exit the selected function or menu item by pressing „IRIS CLOSE“.
Keyboard SANTEC KSC-3505 (example)
„IRIS OPEN“ or „IRIS CLOSE“
