Bedienungsanleitung / User manual
VDC-727IR-WM, VDC-727IR-WBJB
_________________________________________________________________________________
- 71 -
3.4.1 Dome address setup
Here you can enter the ID address of the speed dome.
Address type:
You can choose
between „physical“ and „logical”.
Dome ID: *
If you have selected “physical”, the DIP-switch settings at the connection interface apply.
If you hav
e selected „logical“, you can change the ID address of the speed dome here.
* If several speed domes are installed in a RS-485 network, each dome hast o have its own ID.
Broadcast ID:
Can be activated/deactivated.
Press „IRIS CLOSE“ on the keyboard to exit the menu.
3.4.2 Auto flip
Select ON/OFF to define whether the auto flip function is to be activated.
3.4.3 Proportional speed
Select ON/OFF to define whether the pan/tilt speed is to be reduced proportional to the zoom
factor.
3.4.4 Pan reverse
Select ON/OFF to define whether in panning mode, right and left are to be reversed (e.g. if
you want to work with a mirrored image).
DOME ADDRESS SETUP
1 ADDR TYPE
PHYSIC
2 DOME ID
243
3 BROADCAST ID
AN/AUS
