Bedienungsanleitung / User manual
VDC-727IR-WM, VDC-727IR-WBJB
_________________________________________________________________________________
- 57 -
2. Speed dome installation
2.1 Wall mount
Preparation:
The dome including wall bracket weighs approx. 8 kg and is thus rather heavy.
Therefore it is recommended that 2 persons mount the dome to make the installation
process easier.
Please ensure that the selected wall is solid and strong enough to carry the weight of
the speed dome and the wall bracket.
The delivery contains 2 boxes: In the first box, you will find the speed dome, the
separate dome cover and the accessories. The second box contains the wall bracket.
Please see the description below to fix the speed dome to the wall bracket.
Start with the wall bracket.
Installation:
Take the wall bracket out of the box.
Use the provided Allen wrench to loosen the
upper of the two safety screws.
Remove the thread.
Put the thread back on the bracket.
Put your thumb inside the thread and use the other
fingers to hold tight the outside of the thread.
In this position, turn the complete thread clockwise to
tighten it.
Note: This step is necessary to seal the thread.
Now tighten the upper safety screw again (which you
had previously loosened).
Pull the provided 50 mm rubber gasket over the
thread.
