Bedienungsanleitung / User manual
VDC-727IR-WM, VDC-727IR-WBJB
_________________________________________________________________________________
- 58 -
Lead your connection cables through the wall
bracket. The cable end should hang out of the
bracket by approx. 10 cm.
Then mount the wall bracket to the wall (make
sure the wall is able to carry the weight!).
(Please also read the manual of wall bracket
WM-HDH-306).
If you don’t want to use the already connected
video connection adapter, you may also connect
a coax cable directly to connector blocks
VI and VG.
To do this, it is helpful to open the service lid on
the wall bracket to have better access to the
cables/BNC-plug.
If previously opened, close the service lid again
before you continue with the installation.
Opened
service lid
on wall
bracket
Use a pointed, round item (e.g. a pen or a Phillips
screwdriver; no knife!) to pierce a hole into the
membrane of the seal stopper. The hole should just
be large enough to allow the connection cables to go
through.
Put the seal stopper in the wall bracket.
The purpose of the seal stopper is to prevent
moisture or dust from getting onto the connection
interface of the dome.
Connect the cable with the plug (also see chapter
2.2
“Connectors“).
