ENGLISH
17
4. Install the foam tube. Spray the inner
and outer surfaces of the foam tube with
silicon spray. Insert the foam tube into the
lower access port of the downtube so it
wraps around the housing. Pull the line
and foam insert back up toward the head
tube access port, then push the housing
into the seat tube. Hold the foam insert in
place (inside the downtube) so it doesn’t
travel up the seat tube.
5. Continue to push the end of the housing
through the lower downtube access port
until it exits the top of the seat tube.
6. Install the remote and seatpost according
to your seatpost manufacturer’s
instructions (not pictured).