ENGLISH
13
1. Disconnect the hydraulic line from the
remote to the seatpost according to your
dropper post manufacturer’s instructions
(not pictured).
2. Install the remote onto the handlebar
according to your manufacturer’s
instructions (not pictured).
3. Make sure the grommet on the drive side
access port of the head tube is installed.
4. Use a 2 mm and a 4 mm hex wrench to
remove the two hatch cover bolts at the
bottom of the downtube. Remove the
hatch.
5. Push the end of the line into the drive side
access port until it exits the lower access
port of the downtube.
DROPPER POST ROUTING - HYDRAULIC-ACTUATED REMOTE
