ENGLISH
14
6. Install the foam tube. Spray the inner
and outer surfaces of the foam tube with
silicon spray. Insert the foam tube into the
lower access port of the downtube so it
wraps around the line. Pull the line and
foam insert back up toward the head tube
access port, then push the line into the
seat tube. Hold the foam insert in place
(inside the downtube) so it doesn’t travel
up the seat tube.
7. Continue to push the end of the line
through the lower downtube access port
until it exits the top of the seat tube.
8. Reconnect the line to the seatpost
according to your dropper post
manufacturer’s instructions (not pictured).
