6. STEERING SYSTEM
6-1
6. STEERING SYSTEM
STEERING WHEEL ··································· 6-1
STEERING LINKAGE ································· 6-1
STEERING GEARBOX ······························· 6-1
STEERING ALIGNMENT ···························· 6-2
Inspect the tie rod for distortion or damage. If any damage are found, replace the tie rod with a new one.
Inspect the tie ends for smooth movement. If there are any abnormalities, replace the tie rod end with a new one.
Inspect the tie rod end boot for wear or damage.
If any damage are found, replace the tie rod end with a new one.
Tie rod installation
1.
For the installation, reverse the removal
procedure.
2.
Tighten tie rod lock nuts finger tight.
3.
Install tie rod on steering knuckle..
4.
Torque tie rod retaining nut to 60N.m.
5.
Install new cotter pins. Both ends of cotter pins
must be folded around nut.