![background image](http://html1.mh-extra.com/html/sanmen-county-yongfu-machine/utv650/utv650_maintenance-manual_3984393033.webp)
3. Cooling system
3-6
WATER PUMP HOUSING
It is located on the engine MAG side.
Water Pump Housing Removal
Drain cooling system.
Remove radiator outlet hose from water pump
housing.
Remove screws retaining water pump housing.
1.
Screws
2.
Water pump housing
3.
Sealing ring
Pull water pump housing to remove it.
Water Pump Housing Inspection
Check if gasket is brittle, hard or damage and
replace as necessary.
1.
Gasket
Water Pump Housing installation
The installation is the opposite of the removal
procedure.
CAUTION: To prevent leaking, take care that the
gasket is exactly in groove when you reinstall the
water pump housing.
Tighten screws of water pump housing in a
criss-cross sequence.
WATER PUMP IMPELLER
Impeller Removal
Remove water pump housing.
Unscrew impeller.
1.
Impeller
CAUTION:
Water pump shaft and impeller have right-hard
threads. Remove by turning counterclockwise and
install by turning clockwise.
Check impeller for cracks or other damage.
Replace impeller if damaged.
Impeller Installation
The installation is the opposite of the
removal procedure.
Be careful not damage
impeller wings during installation.
! WARNING
To avoid potential burns, do not remove
the radiator cap or loosen the cooling
drain plug if the engine is hot .