SANKI P212-F, Инструкция по эксплуатации

Страница: 32 / 40

30/36
12. Parameter Setting Method
1) Parameter data setting method
0.0
0A0.0 0b0.0 0C-- 0d--
0E0.0 0F0.0 0n10 0LoF
0o1.0 0P 9 0 on 0r oF
05 L 06Lo 07hi 08AL
PAL1 0.0 240.0 V2xx
io01 0u 0
0A 0.0
0A 1.5
0A1.5
0.0
Press the
Func key long
for 2 sec.
Set key
Freq ▲▼
keys
Set key
Normal mode screen
Blinking
Blinking
Vol ▲▼ keys
Press the
Func key long
for 2 sec.
Parameter mode
screen
The normal
mode screen
appears.
※ When the Set key is pressed after value setting,
the set value is saved.
※ If the Vol ▲▼ keys are pressed without pressing
the Set key in the change process, the changes will
not be saved but cancelled.
If there is no key operation for over 5 min, the
normal mode screen (voltage display) will be forced
to reappear.
※ When the Set key is pressed at the parameter
to be set, the parameter item blinks, and the
parameter value can be changed. Here,
Parameter No. 0A is exemplified.
*
*
*
*
* *
*
*
※ When the Vol ▲▼ keys are pressed in the parameter mode,
the display of the parameter items shown within the following
frame can be switched:
Vol ▲ key: Switching 0A → 0b → 0C… in this order
Vol ▼ key: Switching 0A → 0u → io01… in this order
※In the A mode, only the parameters marked with “＊” can be
changed.
In the n mode, all parameters can be changed.
For details, refer to the table of “Parameter Settings.”
*