SANKI P212-F, Инструкция по эксплуатации

Страница: 23 / 40

21/36
0.0
0.0
Ｓｒｃｈ
n
180.0
Ｌｕｎｉ
180.0 152.0
25.0
0.0
25.0 20.0
n SAVE
20.0
④ -B When the Vibration Sensor KS-3 is used
(When the feedback control is performed in the constant amplitude
mode, 0u=1, 2)
ON/OFF
key
Press the
Set key long
for 2 sec.
※ The following operations
are performed in the forced
operation:
Press the
Set key long
for 2 sec.
※The “Hz” lamp and the
“%” lamp blink alternately,
and the tuning starts.
Upon the end of blinking,
the tuning is completed.
Func key
Press the
Set key long
for 2 sec.
※The “Hz” lamp and the “%” lamp blink
alternately, and the tuning starts.
The tuning is performed at 30% output.
Upon the end of blinking, the tuning is
completed.
Vol ▲▼ keys
Vol ▲▼ keys
※ Go to < ⑤ Switching from the adjustment mode to the operation mode>.
Blinking
Alternately blinking
Press the
Freq ▲ key
2 times
Alternately blinking
※ Adjust the value of
the output% to achieve
the required speed.
Func key
Vol ▲▼ keys
※ Raise the output % to
around 30%.
Freq ▲ key
※ When the tuning and the frequency
search are in operation, do not touch
the feeder, or the feeder could go out
of order.